Using Your Horizon Ten Charger
Connecting Power Source
Connect mains plug to a convenient power outlet.
Connect USB-C cable to your Horizon Ten charger.
Use two screws to securely fix the included hanger to your wall within reach of a power outlet.
When the hanger is attached to a wall you can vertically mount your Horizon Ten charger.
Your Horizon Ten charger is able to power and control up to ten Engines when placed on a table top or wall-mounted.
Similarly, up to ten Lamps can be powered and controlled. However, we recommend you only use Horizon Ten with Lamps on table tops.
Lamp Contact Alignment
Ensure the metal contacts on the underside of the engine make magnetic contact with Horizon Ten's power panels.
Engine Contact Alignment
It is important that the engine contacts are aligned with Horizon Ten's power panels, one contact to one panel.
The positions of the contacts are indicated on the top of your engine.
Lamp Charging Indication
When charging lamps, a successful connection is indicated by a three second illumination upon contact with Horizon Ten
When removed your lamp will illuminate for three seconds if it is fully charged.
If your lamp isn't fully charged when removed it won't give an illuminated signal.
Engine Charging Indication
The LED indicator on the top of your Engine will glow Blue during charging and Green when fully charged.
Tap the left button to cycle through three levels of brightness.
Setting Light Mode
Tap the right button to cycle through power off, static light and flicker mode.